1. Unboxing & Placement!

[[excerpt]]
Your OPUS SoundBed has arrived! Lets get your product in the door and set up for use.

LIFT WARNING: Two or more people are recommended when moving this box. Use the designated handles located on either side, and be extra careful if going up stairs.
[[/excerpt]]

Unboxing

  1. Pull the cardboard fasteners out to unlock the main lid.

Two or more people are recommended when moving this box. Use the designated handles located on either side, and be extra careful if going up stairs.

  1. Open the main lid and push it all the way back until it falls to the floor.

  1. Open front panel with large SoundBed printed image and allow it to fall forward to the floor.

  1. Allow the side panels to fall to the ground – all panels should be flat on the floor.

  1. Remove the four cardboard prims away to reveal your SoundBed nestled in the center.

  1. Gently remove the tape around your SoundBed to access a second lid.

  1. Lift the second lid covering your SoundBed using the side handles and let the side flaps fall all the way to the floor. Your SoundBed sits here inside your beige colored OPUS Travel Bag.

Decide Where To Place Your SoundBed

  1. Look around your space and consider where you want it to live. We recommend placing SoundBed somewhere in the home that is easy to access, and ready to use.

  1. Position the SoundBed near a electrical outlet.

  1. Always make sure SoundBed is placed on the floor a reliable and stable surface. SoundBed is optimal when positioned on a rug or carpet, which can absorb some sound and vibrations.

Move SoundBed Into Position

  1. Loosen the draw string and remove the OPUS Travel Bag covering your SoundBed.

  1. Tip your SoundBed onto its side, then rest it on the floor so that the mattress is facedown.

  1. Gently roll your SoundBed like a barrel towards the area in the room where you want it to land.

  1. Tip your SoundBed back up, so that it sits flat as it was in the box.

  1. Unbutton your SoundBed’s storage button.

  1. Slowly unfurl your SoundBed, prism by prism, until it sits fully expanded on its side.

  1. Lower you SoundBed onto the floor. Notice the rubber on each prism to reduce sound.

  1. To adjust SoundBed, pull and maneuver from the Head or Foot prism like this:

SAVE YOUR BOX!!!

This is important – if for any reason you need to ship or return your SoundBed please hang on to your box until you’re sure you won’t need it.

hang on to your box until you’re sure you won’t need it.

If you need help please reach out to help.feelopus.com.

Click here for Setup Guide PT. 2 | Power & Setup.
Return to the OPUS Community Page.